So I'm tired of my echo 1 416 having that stupid battery box on in and i want to route the wires to the back for a battery bag or crane stock but the body is so tight that I can't find a way to route the wires while still clearing the selector switch and the rear retaining pin tab.
current gun Echo 1 614 (430fps), TM m16a2 (365 fps), TM high-capa 5.1 ( 330 fps )
M4 variants, when wired to the rear, ALWAYS have the wires coming out the back of the gearbox.
HeadOnTactical.com
yea but mine come out the front
current gun Echo 1 614 (430fps), TM m16a2 (365 fps), TM high-capa 5.1 ( 330 fps )
You have to open the gearbox and re-route the wiring to the back. There should be a small channel big enough for the wiring to fit into along the inside of the lower perimeter of the gearbox. You may have to detatch and re-solder the positive connection on the trigger assembly because there is probably not enough room to make the u-turn to the back. It's a fairly straight foreward process.
I have always acted in self defense, occasionally pre-emptive self defense.
[quote="Spock"]You may have to detatch and re-solder the positive connection on the trigger assembly because there is probably not enough room to make the u-turn to the back. It's a fairly straight foreward process.[/quote]
HeadOnTactical.com
I've gotten to the step of opening up my mechbox but the T10 drivers I have are only good for removing 3 of the torx screws. the rounded screws seem to be slightly smaller.
current gun Echo 1 614 (430fps), TM m16a2 (365 fps), TM high-capa 5.1 ( 330 fps )
[quote="matt.k"] JG and echo 1 boxes have some T9 screws[/quote]
-insert failed attempt of something funny here-