mooselover81Oct 1, 2009 4:46am
Ok so I was wondering if anyone is familiar with Dboys and A&K, more or less if anyone can give me a run by on the quality of the internals. Feel free to throw down any pearls of wisdom. thanks
I need some knowledge...
BlainOOct 1, 2009 5:16am
Dboys and A&K are basicly clones, or re-wroked clones w/ better springs.
Seek the Narrow Gate, for the path is broad and the gate is wide that leads to destruction.
spotOct 1, 2009 5:35am
They can be a good base to build off of, if they are set up properly they run good, but basic stock....most of the failures I have seen with friends guns are due to poor factory setup and second rate QC.
Look its a bird its a plane, no its just my broken aeg flying all over the place.
rockettravisOct 1, 2009 7:04am
Dboyi has great bodys for a clone and poor internals in my opinion. I used to work on AEGs for a living. A&K is just terible, poor QC and needs alot of work to make decent. If you want cheap, I say echo 1. They will work well for a while and will shoot 370-400 stock. They last longer than most "China clones" and have a waranty and aceptable QC. Echo 1 will take china clones and improve them by adding a few things here and there ect.
mooselover81Oct 1, 2009 2:55pm
ok, thank you all for the insight I appreciate it. I had another question to go with the one above, would performance increase if you replaced clone internals with CA? Ive heard mixed responses about CA internals, some say there good and others say they suck, I have a set I might put into an SPR but I need to know if it would do more harm or not if I did.