I have a tokyo marui mp5 thats cycling really slow. Even with the stock spring. Batteries are fully charged and its still a no go. btw im using a 9.6v 1700 nimh batt from aex. Then i tried a GP 9.6v 3300 nimh batt. Shoots a little faster but its still slow. My m15 cycles way faster with a 400 fps upgrade. The mp5 only has a 330 fps upgrade. But as i said, even with the stock spring, it cycles really slow...
ten bucks says its shimmed way too tight.
8017312 6
done that. put together the gearbox without the cylinder and the gears move freely. (i screwed the gearbox together to make sure)
how are the coils on the motor, still shiney, or dull and burnt looking? any pieces of anything tucked in a corner of the gearbox in the way of anything that moves?
How do i check the coils on the motor? I opened up the mechbox, no random pieces lying around. relubricated the gears, cylinder, etc.
The gun i got used from a friend. I would assume about half a year to a year old? if it helps, this is what is exactly in the mechbox.
it could be the wiring my G36 was cycling slow, and Neo mangaged to trace it down to part of the wiring harness.
the conectores to the motor mabey?
ok i traced the wires to the problem. i connected the battery directly to the gearbox and it shot great. i added the full stock wiring and then it shot slow. >< thanks for the help guys!
put a different motor in it and try that. same happened with my m4 and this solution worked perfectly.
And shephards we will be.
