Leslie ChowJan 25, 2007 3:21am
i just got a g23 from a member off arnies, and i fired it for a little while, and it was good, but now, the trigger seems to be locked, like there is a safety on, i cant shoot in semi or auto.
help with g23f
fuddruckersJan 25, 2007 3:24am
take the slide off, is any thing jamming behind the hammer or jaming the trigger springs.
Leslie ChowJan 25, 2007 3:28am
nothing jammed. trigger assembly moves and everything, just cant pull it back the last 3 mm or so to fire the gun
fuddruckersJan 25, 2007 3:30am
manully force the hammer back so like the slide would have done when u cock it, then pull the trigger same issue?
fuddruckersJan 25, 2007 3:31am
manully force the hammer back so like the slide would have done when u cock it, then pull the trigger same issue?
Leslie ChowJan 25, 2007 3:32am
well when i pull the slide off, the hammer is cocked. i cant pull the trigger to release the hammer.
fuddruckersJan 25, 2007 3:35am
lokk at the hammer, on the right side of it there should be hammer release and the trigger dohikey that puches the realse, use a pen and see if u cant manually release the hammer
fuddruckersJan 25, 2007 3:48am
well if your fealing lucky take the hammer apart and find out why. Not a good idea if its your first time. Unles i had it in front of me i cant help u ne more. Aex could always look at it for you.
Leslie ChowJan 25, 2007 3:53am
i should probably leave it alone, as i have never been that lucky unless i was shuffling as i can force and stack cards.
fuddruckersJan 25, 2007 3:58am
ha i hear ya, goo d luck.
Leslie ChowFeb 17, 2007 6:10am
reviving this. is there anyone here who works on gbb? i want to fix this so i can trade with an arnies member.
The_Italian_BoyFeb 17, 2007 6:17am
I think that there is a screw in the back of the slide that holds the whole gas assembly in. Make sure that, that screw hasent backed out...its a commen problem on the auto glocks...atleast I think so
I Love My French Bulldog Cannoli!
Leslie ChowFeb 19, 2007 6:49am
cant really spot that screw. is there anyone who would be willing to work on it?
WestCoastPJFeb 19, 2007 5:48pm
[quote="azn1stknightsoul"]cant really spot that screw. is there anyone who would be willing to work on it?[/quote]
[quote="phonografic
Airsoft>PaintballFeb 19, 2007 6:30pm
Hmm....
GuestFeb 19, 2007 7:28pm
you might have lost a spring that resets the trigger bar so it catches on to the hammer sear when you pull the trigger :P