I have a CA m15a4, i tried to use it today and the motor would not turn. No sounds were made so i checked the battery connections and they felt hot, so i quickly disconnected the battery. Thinking the wiring could have a short i took off the stock and connected the wiring from my mp5. After using the same battery on the mp5 and verifing it to work, I connected the wiring and battery back onto the m15 but got the same result--nothing. I later checked the fuses and found that both are now blown.
ICS + $$$ + time = gun repair experience
Usually the gearbox has froze up for some reason when that happens to me. Could be bad shimming job or other possible factors. Just take out the motor from contacting the gearbox, connect everything, see if the motor turns, then it's probably the gearbox. My 2 cents.
DJ (Dennis)
somethin broke off and jammed the gear box...+1 for the first post...
The shimming is perfect, Tyler was put the gearbox together.
my gun was chroning higher at AEX but have gotten different results on different chronos.
anyone know where I can find replacement fuses? I looked at homedepot and Ace but all i could find where fuses above 125 V. I need one rated near 9V.
ICS + $$$ + time = gun repair experience
[quote="Airacobra"]anyone know where I can find replacement fuses? I looked at homedepot and Ace but all i could find where fuses above 125 V. I need one rated near 9V.
HeadOnTactical.com
